3
26
► Hyper Threading
This item is used to enable/disable the Hyper Threading Technology feature.
► Active Processor Cores
This item is used to set the number of cores to enable in each processor package.
► A20M
Legacy OSes and APs may need A20M enabled.
► EIST
You can select the EIST (Processor Power Management, PPM) through this item.
► Intel(R) C-STATE Technology
This item is used to enable/disable C-State. C-State means CPU idle is set to C2/C3/C4.
IDE Configuration
► Configure SATA as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.
► SATA#1 IDE Configuration
SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the
mode of the SATA ports. Setting values are: [Compatible], [Enhanced].
► SATA#2 IDE Configuration
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust
processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production. There are some system require-
ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
Please refer to Intel Website for more information.
CA
UT
IO
N
!
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
IDE Configuration
Configure SATA as
Help Item
SATA #1 Configuration
[Enhanced]
SATA #2 Configuration
[Enhanced]
IDE Detect Time Out
[35] IDE
RAID
AHCI
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
[IDE]
Options
