3
27
SATA#2 are the SATA ports 5,6 of the motherboard. This item allows you select the mode of
the SATA ports. Setting values are: [Disabled], [Enhanced].
► IDE Detect Time Out
This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.
Onboard Devices Config.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Onboard Devices Config.
USB Devices Enabled: Help Item
2 Hubs
Onboard USB Controller Enable/Disable USB
USB 2.0 Controller
[Enabled]
controller in system.
USB Keyboard Support
[Enabled]
USB Mouse Support
[Enabled]
Serial Port Adress
[2F8/IRQ3]
Serial Port Mode
[Normal]
Parallel Port Adress
[Disabled]
Floopy Controller
[Enabled]
Onboard Audio
[Enabled]
Onboard LAN
[Enabled]
Boot ROM
[Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
[Enabled]
► Onboard USB Controller
This item is used to enable or disable the onboard USB controller.
► USB 2.0 Controller
This item is used to enable or disable the USB 2.0 controller.
► USB Keyboard/Mouse Support
This item is used to enable the support for a USB keyboard or mouse on legacy OS.
► Serial Port Address
This item is used to assign the I/O address and interrupt request (IRQ) for the serial port 2
device.
► Serial Port Mode
This item is used to select the mode for the serial port 2 device. Setting options: [Normal],
[IrDA] and [ASK IR].
► Parallel Port Address
This item is used to assign the I/O address and interrupt request (IRQ) for the parallel port
device.
► Floopy Controller
This item is used to enable or disable the floppy controller.
► Onboard Audio/Onboard LAN
This item is used to enable or disable the onboard Audio or onboard Lan.
► Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.