Installation, Mechanical, Dimensions
1. Attach the wall mounting feet to the rear of the
Mounting screws are not included
2. Mount the detector near the potential leak source
leak, weight of the target gas and air
from the potential leak source.
3. Remove the cardboard protecting the gas sensor.
Local Sensor Housing Dimensions
13
, Dimensions
Attach the wall mounting feet to the rear of the main enclosure using # 10 diameter
re not included.
near the potential leak source; taking into account the location of a potential
weight of the target gas and air flow patterns. For remote styles locate in a safe area away
from the potential leak source.
cardboard protecting the gas sensor.
Local Sensor Housing Dimensions
10 diameter screws.
location of a potential
For remote styles locate in a safe area away
