SMART GPRS 2.0
Quick Installation Guide
This guide describes how to install the SMART GPRS & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
SMART GPRS 2.0
１
Step 1 :
Use a screwdriver to open
the Smart GPRS.
GPRS Stick Installation
1
Note:
*
Please check from the side of the slot to
make sure the SIM Card core has sufficient
contact with the card slot.
Step 2 :
Slide cover to the left to unlock
and open;
Insert the card into the slot
(Make sure the core face is down);
Close the cover;
Slide cover to the right side to
close.
SMART GPRS 2.0
２
*
Please make sure the cover has been slided
properly, otherwise the signal might be
reduced.
Step 3 :
Insert the Smart GPRS
board into the shell.
Step 4 :
Insert the SMART GPRS into the inverter
Wifi/GPRS interface and tighten the dongle.
Note:
*
The device must be away from strong
SMART GPRS 2.0
３
magnetic fields generated by large electrical
equipment, such as microwaves stoves,
refrigerators, wireless phones, photovoltaic
panels and metal walls to ensure
communication quality. Communication
quality might be affected by lightning.
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
