Foxfury Lighting Solutions 410-L06, Product Manual

9

INSTALLING THE SILICONE STRAP  |  

5 MINS (APPROX)

(WATCH THE VIDEO: FOXFURY.COM/VIDEOS)

Place the headlamp on a flat surface. Position the Light Head so the Power/

Mode Switch is on the left and the LEDs face forward. NOTE: Make sure the 

FoxFury logo on the Battery Pack is correctly oriented before beginning.

1.  The Silicone Strap comes with two (2) buckles. Attach the first buckle 

onto one end of the strap (about six (6) inches from the end). Then, take 

that end of the strap and run it through (from the inside) the Buckle Slot 

on the left of the Light Head.

2.  Once the strap is through the left Buckle Slot of the Light Head, feed the 

strap back through the Buckle.

3.  Run the opposite end of the strap through the left Buckle Slot on the 

Battery Pack (on the cable side). Then continue through the Buckle Slot 

on the right side of the Battery Pack.

4.  Repeat Steps 1-2 for the right side of the strap. Adjust the Battery Pack 

position and strap length at the Buckle for the desired fit.

1

2

3

4

1

4

2

3