Foxfury Lighting Solutions 480-L06, Product Manual

6

ON/LOW mode: Press the Power/Mode switch once. All 3 LEDs will turn 

on.

HIGH mode: From LOW mode, press the Power/Mode Switch once. All 3 

LEDs will increase in brightness. From HIGH mode press once more to 

turn headlamp OFF.

NOTE: All P/Ns listed above will power OFF after HIGH mode. When ON (for all 
modes), the rear LED (located on Battery Pack) will flash.

DISCOVER TILT & LO

•

PRO BATTERY LIFE

MODE

BATTERY LIFE

LUMENS

HIGH POWER

5 hours

200

LOW POWER

12 hours

54

*Battery life may vary according to mode selected, battery quality & type, and prevailing 

ambient conditions.

BATTERY CORROSION

Battery leakage may cause corrosion to build inside the Battery Pack, causing 

the light not to function properly. In case of corrosion, please follow the 

suggested steps below:

1.  Remove the batteries from the Battery Pack.

2.  Make a mixture of 50% vinegar and 50% water. Then, pour the mixture into 

the Battery Pack and let it soak for five (5) minutes.

3.  Drain the mixture from the inside the Battery Pack. Dry the inside of the 

Battery Pack (make sure no liquid residue is left inside Battery Pack).

4.  Re-install all four (4) batteries. Test the light’s performance.

5.  Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs. 

NOTE: Corrosion from leaking batteries is 

NOT 

covered by the warranty.

OPERATIONAL MODES

MAINTENANCE

1

2

3

4

5