Foxfury Lighting Solutions 480-L06, Product Manual

8

INSTALLING THE ELASTIC STRAP  |  

5 MINS (APPROX)

(WATCH THE VIDEO: FOXFURY.COM/VIDEOS)

Place the headlamp on a flat surface. Position the Light Head so the Power/

Mode Switch is on the left and the LEDs face forward. NOTE: Make sure the 

FoxFury logo on the Battery Pack is correctly oriented before beginning.

1.  Begin with the end of the strap that does not have the Buckle attached. 

With the FoxFury logo side of the strap facing right, feed the strap through 

the left Buckle Slot of the Light Head.

2.  Run the free side of the strap back through the Buckle. NOTE: The 

FoxFury logo on the strap will now be facing to the left.

3.  Run the remaining bit of strap through the left Buckle Slot on the Battery 

Pack (on the cable side). Then continue through the Buckle Slot on the 

right side of the Battery Pack.

4.  Continue to run the strap through the Buckle Slot on the right side of the 

Light Head. Firmly press the velcro together to finish installing the Strap. 

Adjust the Battery Pack position and strap length at the Buckle for the 

desired fit.

1

4

1

2

3

4

2

3

FoxFury logo

on strap should

face inward for 

STEP 1