Bi-Focus
User Manual
©
2019 FOXTECH All Rights Reserved
21
Use and Operation
Preparation and inspection before using
-Check whether the structural parts of the gimbal are normal, whether there is obvious deformation or
looseness;
-Check the if the lens is dirty, and wipe the lens with a lens cloth;
-Check if the mechanical installation of the system is normal after installing;
-Check if the electrical connection of the system is normal;
-Check if the camera imaging and function is normal.
Safety protection, safety signs and instructions during usage process
Avoid the supply voltage exceeding the allowable range during product using, and avoid using under
excessive load working conditions.
Operating procedures during usage process
After the system is powered on normally, the various functions of the gimbal and camera are controlled by
buttons or joysticks on the handheld terminal of the drone.
Detection and recording during operation
Record problems encountered during usage process and save the corresponding image data.
Operating procedures, methods and precautions after using
Disconnect the system power after using, and move the pod from the drone in a static-free environment.
It should be stored in a dry and ventilated environment and should be placed in the box for long periods
without using.
