Foxtech EH640 30x Optical Zoom IR Thermal Camera
User Manual
©
2020 FOXTECH All Rights Reserved
12
Tablet (or touch screen) mouse, virtual button operation:
1. Yaw, Pitch adjustment
Hold down the left button of the mouse (slides on the screen if using the touch screen) and move up and
down in the interface. the lens move following the mouse position. Loosen the mouse left button, the lens
stops moving and stays in the current position.
2. Point zoom
Double-click the mouse left button (double-click if it is the touch screen), the double-click position move to
the center of the screen and zoom in 2 times, accumulating to the maximum focal segment.
Sliding mouse wheel, can also control the zoom in and out of the lens.
Click the mouse right button (long press for 3 second on the touch-screen ), and the screen automatically
returns to the 1X focus section.
3. Focus
Camera default auto-focus mode, when the screen background is complex, can use the virtual keys "focus
plus" and "focus-" for manual focus.
If the screen blurred for a long time, you can click on the "focus A" virtual button, actively focus.
4. Calibration
If the user does not use the topgun series flight control, not connect digital link, CAN transfer. When
operating in an environment with large pre- and post-flight temperature differences (e.g., winter aircraft
moving from indoors to outside). Calibration is recommended before flight to reduce heading drift.
5. Auto tracking
Click on the target tracking button, then the mouse moves to the real-time screen display area, press and
hold the left mouse button, drag to select the desired tracking target area, release the left mouse button will
appear a box. the pod will automatically track the target inside the box.
6. Calibration steps
pod initialization is complete, into normal working state. Clicking on the calibration virtual button (setting →
calibration), the pod will enter the calibration state (the gimbal motor does not work at this time) ensure that
the aircraft and the gimbal is in a static state (the gimbal does not need to keep horizontal), after waiting for
5 to 10 seconds, the pod is re-initialized to complete the calibration.
Game Joystick Operation:
GCS supports USB game joystick control pods (take Northlink Bat DFBTP-2126F as an example)
Manual focus+
Auto focus
Manual focus-
Camera zooming
Down press return to 1X
pod up, down, left and right control
Down press then Yaw following
1.Photo
2.REC
3.One key downward
4.One key right front
5.View size shifting
6.Dual sensor mode shifting
7.Dual sensor window shifting
8.Window shifting
