FOXTECH HOBBY
Co., Ltd
Add:
(3rd
Floor)
No.9
Haitai
Fazhan
Sixth
Avenue
Xi
Qing District Tianjin China
Web: www.foxtechfpv.com
Mode function description(connect “MODE”to knob channel)
Rotate knob to position-3:low speed lock mode.The gimbal will move at the lowest
speed when controlling YAW and PITCH,
and gimbal YAW axis will not follow drone
flight direction.
Rotate knob to any position except position-3:variable speed follow mode.
Gimbal
speed will be faster(the speed depends on the angle you rotate the knob,
the bigger
the faster).
Rotate knob to position-1,gimbal back to home position.
Flip 1 time between position 2 and position 1,gimbal goes back to home position
Flip 2 times between position 2 and position 1,gimbal goes to speed mode.
Flip 3 times between position 2 and position 1,gimbal goes to angle mode.
Flip 4 times between position 2 and position 1,gimbal goes to accelerometer
calibration
Flip 5 times between position 2 and position 1,gimb
al
goes to gyro calibration
Notice
:gimbal will goes to gyro calibration automatically if the gimbal stays still with
the power on.The gimbal will works in the mode that is used last time.The factory
work mode for the gimbal is angle mode.
