11
3、Use the matching assistant so
ftware, select the corresponding port and
click the connection to read the parameters, as shown in the figure below.
4、I
f you want to modify the parameters, just change the corresponding value
in the software, click on the
W
rite, and then
C
onfirm, as shown below
.
5、
After the modification is completed, press the Set button again or power up
again to exit the configuration mode.
Not
e
:
1. Please ensure that the parameters of the ground unit and air unit are exactly the same, otherwise
the two modules cannot communicate.
2. Communication bandwidth and communication power directly affect communication quality and
communication distance
。
If you don’t understand its meaning, please do not modify these two parameter
values.
3. After entering the configuration mode to complete the parameter configuration, be sure to exit the
configuration mode.
www.
foxtechfpv
.com
