CAUTIONS
1. Input voltage: Supports 4-6s only.
2. Please allow 2 seconds for the self-checking of gimbal after powering on. The self-
checking is done once a reminder tone is heard. Please do not shake the gimbal during
the self-checking. If there’s no reminder tone for a long time and the gimbal failed to
self-check, please re-connect to the power.
3. Recommend 3 modes of switch control to record and take pictures. Stop at low
mode, record at middle mode and non-stop recording at high mode.
4. Make sure to stop recording before powering off so as to avoid the possible damage
to the recorded videos.
5. Three modes of the gimbal: Lock Mode (low-grade), Follow Mode (Mid-grade),
Camera Down Mode (High-grade). The gimbal will return to middle after switching
to Lock Mode from other modes.
6. Any removal and modifications of the gimbal are prohibited. Or you can not enjoy
the after-sales service. And as for the loss caused by, we don’t undertake any
responsibility.
7. We reserve the rights for information modification in terms of
product specifications and performance without prior notification.
