THEA-130 / 160 Sprayer Drone
User Manual
©
2019 FOXTECH All Rights Reserved
44
Installation of Ground Station and Drivers
Installation
Operating environment: WIN2000, WINXP, WIN Vista, WIN7, WIN8, WIN10
First, if you want to install it in Win10 system, it needs digital certificate authentication; the specific operation
is as follows:
1) Click “settings” ”update and safety”
2) Click ”recover”->” advanced startup” -> ”restart immediately”
3) After restart, click “troubleshooting”-> ->”advanced options”->”startup settings”->”restart” follow the
prompts to enter 7 to forbid drivers to force signatures Then, install the ground station software:
1) Click “ByAero.exe”
2) Choose the installation path
3) Follow the prompts
4) Finish
Finally, if you need to connect the flight control to the ground station using USB cable, please make sure
that you have chosen the right driver, as shown below:
Install data transmission driver:
The first method: If your computer is in a networked state, access the data transmission radio, drivers will be
loaded automatically.
The second method: If your computer hasn’t link to the network, unzip “BOYING data transmission drivers”
to the root directory of C, then access the data transmission devices on the ground station, it will prompt
that it could not find drivers.
Specific steps of loading drivers are as shown below:
a. Right-click “my computer”->”management”->”devices management”->”port”
b. Choose the driver with yellow exclamation point, right-click “update drivers”->”browse the computer…”
choose the folder where to unzip the driver, click “next”. If installation fails, repeat it twice or more.
