18
ET2530 Multi-System Scanner Manual_English_V1.02
5.1.1 Quick Scan
Quick Scan
performs an automatic system test to determine which control modules are installed on
the vehicle and provides diagnostic trouble codes (DTCs) overview. Depending on the number of
control modules, it may take 10 minutes or longer to complete the test.
To perform an automatic system scan:
1.
Scroll with the arrow keys to highlight
Quick Scan
from the menu and press
ENTER
to start.
Figure 5-1 Sample Main Group Screen
2.
To pause the scan, press the function key corresponding with
Pause
on the screen.
Figure 5-2 Sample Quick Scan Screen
3.
At the end of successful automatic controller scan, a menu with a list of installed controllers
together with their DTC overview displays.