2 - 3 cm
Auto-scan Type
Multi-frequency
Up to
4
different remotes in
1
-BFT
1.Hold button 1 and press button 2 four times ,then release both buttons,the
led of FY-DPBF emits a quick flash every 2 sec.
2.Place the original remote control in front of the remote, at about 2-3 cm of
distance
3.Press and retain pressed the button of the original remote control that you
want to copy until the remote's led will turn on with a fix light and then emits a
double flash every 2 sec.
4.Transmit now the seed code of the original remote control (by pressing the
rear hide button or the buttons 1 and 2 simultaneously in the new models)
5. Now the LED will flash quickly, press the button of the remote where you
want to store the code just copied, until the LED will turn off.
receiver.
4.Predispose the FAAC/GENIUS remote control for the emission of the seed
code (by pressing simultaneously the buttons 2 and 3)
5.While the FAAC/GENIUS LED is flashing, place it in front of the FY-DPBF, at
about 2-3 cm of distance and press the button that you want to copy until the
-FAAC and GENIUS
ATTENTION, PLEASE: Verify that the remote control to be copied is a
MASTER.
Pressing any button, the LED should issue a double flash rather than switch
on immediately as a fixed light.
1.Hold button 1 and press button 2 four times
2.Place the original remote control in front of the remote, at about 2-3 cm of
distance
3.Press and retain pressed the original remote control button that you want to
copy until the LED FY-DPBF switches on a fixed light and then It stars to emit
a double flash every 2 seconds.
3.Press and retain pressed the button of the original remote control that
you want to copy until the remote's led will turn on with a fix light and
then emits a double flash every 2 sec.
4.Press and retain pressed once again the same button of the original
remote control.
5.Now the LED will flash quickly, press the button of the remote where
you want to store the code just copied, until the LED will turn off.
6.Now activate the procedure to insert the new remote control
on the receiver.
AMC:
Automa
ti
c matching code
ACM
TX2, TX2 COLOR, TX4
ADYX
TE4433H BLUE, 433-HG BRAVO
AERF
COMPACT, HY-DOM, MERCURI B, MERCURI C, SABUTON, MARS,
SATURN, ST3/N, TERRA, TMP-1, TMP-2, UNITECH
ALLMATIC BROWN, BROWN RED, BRO.OVER, PASS, MINIPASS, TECH3
APERIO
GO, GO PRO, GO MINI
APERTO
(Sommer)
TX02-434-2,TX02-868-2 BLUE,4025 TX02-868-2,4022 TX02-434-2, 4020-
TX03-434,TX-03-868-4,4013,TX03-434-4
APRIMATI
C
TR2/TR4, TM4, TXM
ATA
PTX4 BLUE, PTX4 PINK
AVIDSEN
104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250
COMPATIBILITES LIST
-standard
1.Hold button 1 and press button 2 four times ,then
release both buttons, the led of FY-DPBF emits a quick
flash every 2 sec.
2.Place and press the original remote control in front of
the remote , at about 2-3 cm of distance,until the led of
FY-DPBF starts flash quickly.
3.While the LED of FY-DPBF is flashing, press the
button of the FY-DPBF where you want to store ,the
remote'code just copied, until the led will turn off.
Note:
To duplicate a second button, repeat the operation from
the point 1.
PROGRAMMING:
-V2
1.Hold button 1
release both buttons,the led of FY-DPBF emits a quick
flash every 2 sec.
2.Place the original remote control in front of the
remote, at about 2-3 cm of distance
BALLAN
FM400, FM400E,FM404B,4013
BENINCA TO. GO. WV, TWV, ROLLKEY, APPLE, LOT WCV, CUPIDO, TO.GO. QV, IO,
LOT2WCV,LOT1W,LOT2W,LOT4W,LOT1WM,LOT2WM, T2W,T4W,APPLE
BESIDE
BEZAP,HIT
BFT
MITTO, MITTO M ( MITTO2M/MITTO4M), MITTO RCB (MITTO
RCB02/RCB04), MITTO A (MITTO 2A/MITTO 4A), MITTO B,
TRC(TRC2/TRC4), GHIBLI, MURALE, KLEIO,TE01,TE02,TE04,RB4
MURALE
CAME
T431,T434,TOP432A,TOP434A,TOP432,TAM432SA,TOP432NA
CARDIN
TRQ S449 (TRQ449100/TRQ449200/TRQ449300/TRQ449400), TRQ S449
GREEN (PRECODE), TXQ S449 (TXQ449200/TXQ449300/TXQ449400),
TXQ S449 GREEN, TRQ S486 (TRQ486200/TRQ486400), TXQ S486
(TXQ486200/TXQ486400), S437 TX, XRADO,S449,S476TX2,S476TX, S486
CASALI
JA33 AMIGO, GENIUS/CASALI A252RC
AMC
AMC
AMC
AMC
AMC
AMC
Automatic matching code
:
Hold on pressing press the button you want to match
code. until the receiver emitt the code ,the led of the
remote flash quickly ,then release the button ,the
remote’s code has matched successfully .
Emitting seed code:
Pressing the button 1 and button 2 at the same time
until LED flashes quickly . Release two buttons .press
the button that you want to emit seed code , it has
emitted seed code successfully .
FY-DPBF UNIVERSAL REMOTE
Best position for duplication
AMC
AMC
6.Now activate the procedure to insert the new remote control on the
the correct copy of the code.
remote’s led will change frequency of flashing (faster than before), as
confirm of
and press button 2 four times ,then
