Operating with WiFi stick (optional)
37
SSID
Name of the Access Point (ASCII characters, no special
characters).
Standard: Tixi device type SN (see page 36).
EnableOnStartup
This parameter determines whether the WiFi access point is
automatically activated when the system starts.
0 = do not activate automatically
1 = activate automatically
Standard: 0
Allowed
Connections
Defines how many concurrent client connections are allowed.
Maximum: 5
Standard: 1
Authentication
Specifies the encryption method. WPA2 and WPA2_CCMP are
supported.
Standard: WPA2
Password
WiFi password (ASCII characters, no special characters).
Default value: berlin2000
Hostname
Host name via which the device can be reached (alternative to
the IP address).
Default: see SSID
WiFi IP address of the FP S-Compact: 192.168.100.1
6.2 Automatic connection via WPS (WiFi Protected Setup)
The WiFi Protected Setup (WPS) option is supported in Access Point Mode.
WPS allows automatic connection to an access point without entering a password.
To switch to WPS mode, the access point mode must already be active.
The buttons to turn on the WPS mode are only accessible with the housing open.
Turning on WPS mode
Unscrew the housing cover (see page 19).
Keep the housing cover and the four screws in a safe place.
Summary of Contents for FP S-Compact BB
