Mailing system
Opti
mail 30 – Service documentation
Zac Moody/Andrew Nagel Revision June 2005 optimail30 service mode chapter2 (dealer)
Page
17
FRANCOTYP-POSTALIA
S5: Scale
S
TEPS
:
Information about the Meter
Î
Scale
Shows Scale information
The Information shown is as follows:
Scale Electronics Version
Shows the current electronics version
Scale Electronics Serial Number Shows the serial number of the scale main board
Version Load Cell
Shows the current Load Cell version
Scale Version
Version number
Manufacturer
At this time HBM Darmstadt / Germany
Date of manufacture
Date when the scale is manufactured
Range of operation
Max. weight which the scale operate with (5000g=10lb)
Factory Gravitation
Gravitation in the Factory Germany/Birkenwerder
Factory Calibration
R & D use only
Factory Gain / Date rate
R & D use only
Number of calibrations
Shows how often the scale is calibrated
Calibration factor
R & D use only
Last calibration date
Date of the last calibration
Gravity calibration
R & D use only
Last calibration value
R & D use only
User selected gravity
Allows the customer to select the gravity setting for their local area
S6: Rate Table
S
TEPS
:
Information about the Meter
Î
Rate Table
Shows Rate Table information
S7: Ink Ribbon
S
TEPS
:
Information about the Meter
Î
Ink Ribbon
Shows Ink Ribbon (Cassette) information
Remaining Ink Ribbon Shows the percentage of ribbon remaining
Country Code
Should always show USA
Manufacturer ID
There are two different manufactures displayed as 1 and 2
Date of manufacture
Date cassette was manufactured
Number of imprints
Displays the TOTAL number of imprints made, including reports
Cassette Type
19 = Red Fluorescent