Mailing system
Opti
mail 30 – Service documentation
Zac Moody/Andrew Nagel Revision June 2005 optimail30 service mode chapter2 (dealer)
Page
3
FRANCOTYP-POSTALIA
1
OPTIMAIL
30
S
ERVICE MODE
The opti
30 has 3 Service modes:
•
Submenu „Production“- for the production in the factory.
•
Submenu „TEE“- for the R & D department in FP.
•
Service menu for FP service Technicians
Service mode start
Service mode end
Machine is switched on main screen is displayed
•
Insert Dealer Card
•
Press
Menu
button
•
Select System Settings
•
Select Service Mode
•
To exit service mode restart the machine
by using the “Restart” option or
•
Switch off the meter.
Note
The Main Menu option “Service Mode” is only available if the dealer card is inserted.
All information within this document are based on software Version 5.18.4 (CW18 / 2005)
Agreement:
For purposes of this manual the soft keys on the right of the display will be numbered S1 to S4, other additional
functions that are only visible after pressing the (
Ø
…Cursor down) will be numbered S5 to S15. For Example:
The menu “Test Function” has 15 options, therefore the soft keys will be numbered S1 to S15, but you would
need to press the cursor down button 3 time to get to the end of the list.
Overview
Menu
Test Functions
Tests
Display Test
Key Test
Motor Test
Scale
Consumable Protection
Sensor Test
Modem Test
Interface Test
Card Reader Test
Audible Signals Test
Security Device Echo Test
Secure Echo (remote)
Self Test
Endurance Test
Menu
Settings
General Settings
Modem and Telephone Numbers
Security Device
Print Settings
Clock
Scale Settings
Meter Settings
Reset
Menu
Restart
Menu Information about the meter
System
Security Device
Error-Log
Error Statistics
Scale
Rate Table
Ink Ribbon
Modem
All Information
Menu
Data Transfer
All Information
Load Software
Menu Create Master Card
Menu Load from Chip Card
