Installation and commissioning
21
Assembling the catch tray
• Attach the catch bracket to the catch tray:
To do this, insert the catch bracket into the
guides on the underside of the catch tray.
• Place the catch tray to the right of the
franking machine.
• Slightly lift the franking machine on the
right side. The bottom side of the housing
features slots where the catch trays are
fastened.
• Slide the catch tray under the franking
machine so that the catches engage in the
slots.
• Carefully place the franking machine on
the catch tray.
Assembling the Drop Stacker
Instead of the catch tray, the optional high
capacity FP Drop Stacker can be placed to
the right of the franking machine.
For details on setting up the Drop Stacker,
refer to the installation instructions supplied
with the Drop Stacker.
Catches
