51.0077.0004.01 Rev.03
FP wMBusConf - Operating Manual
4 Safety instructions
Operating Manual
Safety instructions
Target group Electricians
This manual is intended exclusively for qualified electricians who are familiar with the safety standards
of electrical and automation engineering. Project planning, installation, start-up, maintenance and
testing of the devices may only be carried out by a recognised qualified electrician.
Any interventions in the hardware and software of our products, unless they are described in this or
other manuals, may only be carried out by our qualified personnel.
Intended use
Only use FP InovoLabs IoT gateways for the applications intended, as described in this manual. Ensure
that all specifications in the manual are observed. Unqualified interventions in the hardware or
software, or a failure to observe the warnings in this manual can cause serious personal injury or
damage to property. In this case, no liability is accepted and all warranty claims become invalid.
Safety-relevant regulations
When project planning, installing, starting up, maintaining and testing the devices, the safety and
accident prevention regulations applicable for the specific application must be observed.
This manual provides instructions that are important for proper and safe use of the device. The
individual instructions have the following meanings:
DANGER
Means that there is a risk to the user’s life if the corresponding preventive
measures are not taken.
CAUTION
Means that there is a risk of injury for the user if the corresponding preventive
measures are not taken.
ATTENTION
Means that there is a risk of damage to the device, the software or other material
assets if the corresponding preventive measures are not taken.
Please also refer to the further literature specified in section 4.7.
