51.0077.0004.01 Rev.03
FP wMBusConf - Operating Manual
13
Operating Manual
Appendix
4.5
Wired M-bus interface
Standard
EN13757-2 and EN13757-3
Current
consumption
5 standard loads; max 7.5 mA
Addressing
- Primary addressing: by default = 0, can be adjusted using the wMBusConf
software
- Secondary addressing: ID = 2xxxxxxx, with xxxxxxx = serial number
4.6
USB stick supplied as standard
A USB stick is enclosed with the wMBus adapter. Additional software and manuals are saved on it.
USB stick contents
Directory
Meaning
USB
FTDI driver software for configuration via the USB interface
wMBusConf
wMBusConf configurations software for Windows
Documentation
FP-wMBusAdapter-operating-manual_Rev1.0.pdf (this manual)
Documentation
FP-wMBusConf-operating-manual_Rev1.0.pdf (wMBusConf software)
4.7
Bibliography
[1]
FP S-OTGuard Hardware Manual: “510071900601_XX_FP_S-OTGuard_HW-Manual_EN.pdf”.
[2] FP-TiXML-Reference (EN): “510058920001_XX_FP-TiXML-Reference_EN.pdf”.
[3] FP PLC-TiXML Manual: “510058920101_XX_FP-PLC-TiXML-Manual_EN.pdf”.
[4] FP SCADA / GLT Manual “510058920601_XX_FP-SCADA-GLT_EN.pdf”.
[5] FP OpenVPN Toolkit Quick Guide “510058921201_XX_FP-OpenVPN-Toolkit_Docu_EN.pdf”.
[6] FP XP-Modules Hardware Manual “510072900101_XX_FP-MAN-XP_EN.pdf”.
xx = Revision of the document, starting with 00
Further manuals and data sheets are available on our website at:
https://www.inovolabs.com/infobereich/downloads/handbucher-datenblatter
4.8
Illustrations
