15
Use the supplied mini stand to position the slave unit.
Before shooting, perform a test flash and test exposures.
The transmission distance might be shorter depending
on factors such as positioning of slave units, interference
from other signals, barriers, bodies of water, and
weather conditions.
Wireless Flash Shooting: Radio (2.4G)
Transmission
Wireless Multiple Flash Shooting
Using a flash with a radio transmission wireless shooting makes it
easy to shoot with advanced wireless multiple flash setups, as well as
i-TTL autoflash shooting.
The basic relative position and operating range are as shown in the
picture. You can then perform wireless i-TTL II autoflash shooting just
by setting the master unit to
< i-TTL >
.
You can divide the slave units into two or three groups and perform
i-TTL autoflash while changing the flash ratio. In addition, you can
set and shoot with a different flash mode for each firing group, for
up to 3 groups.
Transmission distance
is about 100m.
Autoflash Shooting with One Slave Unit
Positioning and Operation Range
Auto Shooting with Two Slave Groups