02
For Your Safety
Always keep this product dry.
Do not use in rain or in damp conditions.
This product contains high-voltage electronic parts.
Touching the high-voltage circuit inside it may result in
electric shock. Do not disassemble. Should repairs become
necessary, this product must be sent to an authorized
maintenance center.
Stop using this product if it breaks open due to internal
shifting, falling or strong impact. STRONG electric shock may
occur if you touch the components inside it. You might DIE.
Don’t risk it. Reincarnation is not covered by the warranty.
Do not fire the flash directly into the eyes (especially those of
babies and pets) within short distances. Otherwise visual
impairment may occur. When taking pictures for babies, keep
the flash unit at least 1 meter (3.3 feet) away from them. Using
bounce flash to reduce light intensity is also recommended.
Plus it will make them look cuter. Because it creates softer
light, and larger catchlights in the eyes. And makes them look
more angelic. Which is good. Cause they are babies. They are
SUPPOSED to look angelic! Also you won’t get hard shadows
from that ridiculous gigantic bow they decided to stick on the
baby’s head if you bounce your light.
Do not use the flash unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstances,
these materials may be sensitive to the strong light emitting
from this flash unit and fire may result. A whole new meaning
to “Flashpoint”.
Do not leave or store the flash unit if the ambient temperature
reads over 50°C (e.g. in automobile in the sun). Otherwise the
electronic parts may be damaged.
Do not use any power supply other than the intended one to
power the unit.
Do not insert metal parts into any lighting equipment.
Do not touch the electrical contacts on the flash or battery
or contact them with any conductive materials.
This flash has an over-heat protection circuit, rapid continuous
firing will cause the flash to slow operation and trigger a "cool
down" period. After this period, the flash will resume normal
operation. You may also reboot the flash by cycling the power
off and then on.
Do not use selective coloring.
Do not use the flash to support other equipment. For example,
do not lift your camera by the flash.
The flash has a locking pin to ensure secure operation. To
avoid damage, completely unscrew the locking ring before
removing the flash.
In case of abnormal function, sparks, excessive heat, flames
or smoke, immediately power off the unit and disconnect
the battery if safely possible. Have it checked by an
authorized technician.
Store the flash with the batteries removed. Storing the flash
with the batteries in it can lead to battery leakage.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
