06
Attaching to a Camera
Attach the Camera Flash.
Secure the Camera Flash.
Detach the Camera Flash.
Slip the camera flash’s
mounting foot into the
camera’s hotshoe all the way.
Rotate the lock ring on the
mounting foot until it is
secure.
Rotate the lock ring on the
mounting foot until it is fully
loosened.
Power Management
Use ON/OFF Power Switch to power the flash unit on or off. Turn off
the unit if it will not be used for an extended period of time. Set as a
master flash, it will turn the power off automatically after approx. 90
seconds of idle use. Pressing the camera shutter halfway or pressing
any flash button will wake up the flash unit. Set as a slave flash, it will
enter sleep mode after a certain period (adjustable, 60 minutes by
default) of idle use. Pressing any flash button will wake it up.
Disabling Auto Power Off function is recommended
when the flash is used off camera.
See the Custom Function Menu section.
Slave Auto Power Off Timer is set to 60 minutes by
default. Another option “30 minutes” is available.
See the Custom Function Menu section.