07
Press
< MODE >
Mode Selection Button to enter i-TTL(Automatic)
mode.
* Press
< MODE >
Mode Selection Button and three flash modes
will display on the LCD panel one by one with each press.
Flash Mode – i-TTL Autoflash
i-TTL Mode
This flash has three flash modes:
i-TTL
, Manual
(M)
, and
RPT
(Stroboscopic). In
i-TTL
mode, the camera and the flash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available: FEC,
HSS, second curtain sync, modeling flash, etc.
Press the camera release button halfway to focus. The aperture
and effective flash range will be displayed in the viewfinder.
When the shutter button is fully pressed, the flash will fire a
pre-flash that the camera will use to calculate exposure and flash
output the instant before the photo is taken.
With FEC function, this flash can bias the flash output from -3 to +3
in 1/3rd stops. It is useful in situations where minor adjusting of the
TTL system is needed based on the environment.
FEC: Flash Exposure Compensation
Setting FEC:
Press Function Button 2
< >
. The icon
< >
and flash exposure
compensation amount
will be highlighted on the
LCD panel.
Turn the Select Dial to set the
amount.
“0.3”means 1/3 stop.
“0.7”means 2/3 stop.
To cancel the flash exposure.
compensation, set the amount
to “+0”.
Set the flash exposure
bracketing amount.
Press
< SET >
button again to
confirm the setting.
