Part No.26117 Rev. F September 2018
- 28 -
Inline 3000 Series Cabinets
Bench Cut-outs
AMBIENT CABINETS
-
MECHANICAL DRAWINGS
In Bench
Mounting
Remove the decorative end panels from the base, to allow in bench mounting.
The following diagram shows the aperture dimensions, which will allow the
cabinet well to enter the bench. The cabinet deck trays will then be just above
bench height.
On Bench
Mounting
The following diagram shows the size and location of the holes, required for the
cabinets to sit on the bench.
The holes are always in the same location, with reference to the back, right
hand corner of all cabinets.
