IN 3A06,09,12,15-SQ
- 9 -
© Future Products Group
Preparation
AMBIENT CABINETS
-
OPERATION
Shelf Location
and Ticketing
The shelves are adjustable in
height and can easily be moved
up or down, to match product
size.
The movement is restricted to
50mm, because of the electric
cables to the lights. For greater
movement contact the
manufacturer or supplier for
advice, as electrical modifications
may be required.
The front and rear edges of the shelves are profiled to carry ticketing/labels.
Shelf
Adjustment
To move the shelf brackets, first remove the shelf
trays.
Lift the brackets straight up firmly and then pull the
brackets forward, to disengage them from the slots
in the support posts.
Insert the brackets into their new position, and
push bracket down firmly.
The brackets may be positioned to give two
different degrees of slope to the shelves.
Refit all shelf trays and doors
.
N.B.
Make sure brackets are pushed down as
far as they can go. Failure to do this may result in shelf collapse, when
loaded with product.
Fumes and
Odours
Before first use, operate the cabinet for 1-2 hours with the doors open, to
remove any fumes or odours, which may be present. This will avoid possible
tainting of food.
Close Doors
It is important to keep the cabinet doors closed during normal use, to prevent
food drying out.
Turn on Lights
When ready for service, turn on the cabinet lights.
