IN 3H06/08/12/15
- 13 -
© Future Products Group
Interior
HEATED CABINETS
-
CLEANING
Cabinet Well
To clean the hot
cabinet well, first
lift out the deck
trays and dividers
and then sweep
out or vacuum
away loose debris.
This cabinet is a dry well unit, so the well is not waterproof. Do NOT pour water
into the well as it will leak out and damage insulation and electrical wiring.
Trays, Racks,
Shelves & Air
Grills
Stainless steel trays, racks, shelves, grills etc. should be cleaned with hot soapy
water. Do not use abrasive pads or cleaners (e.g. Scotchbrite pads or Jif), as
these may damage surfaces.
Warning:
Dishwasher detergents will damage any anodised aluminium parts.
Routines
HEATED CABINETS
-
CLEANING
Schedules
To maintain optimum performance, cleaning schedules must be regular and
thorough.
Inspection
As part of the cleaning routine, the controls, mechanical parts and electrical
wiring should be inspected for damage, deterioration or need of adjustment.
Correction
If any small faults are found, have them attended to promptly by a competent
serviceman
. Don’t wait until they cause a complete breakdown.