IN-5C08/12-OF
- 19 -
© Future Products Group
INSTALLATION
Regulations
REFRIGERATED CABINETS
-
INSTALLATION
Compliance
with Local
Requirements
It is very important that your inline food cabinet is installed correctly and that the
operation is correct before use. Installation must comply with local electrical,
health & safety and hygiene requirements.
Setting Up
REFRIGERATED CABINETS
-
INSTALLATION
Unpacking
Unpack and check unit for damage and report any damage to the carrier and
supplier. Report any deficiencies to your supplier.
All display cabinets are supplied fully assembled, but the shelf trays are packed
separately.
Site
Preparation
Ensure the cabinet location and any bench cut outs are made to the precise
measurements shown in the Mechanical Drawings. Position the cabinet in its
allocated working position.
Rotate the feet to adjust the cabinet height, and use a spirit level to ensure the
cabinet is level from side to side and front to back. (If this is not carried out,
water may accumulate in the cabinet well, and uneven temperature distribution
could also occur).
Cabinet
Preparation
Remove all tapes, ties and packers, used
to prevent movement during transit.
Lift out the deck trays and grills to gain
access to the cabinet well.
Shelf Trays
If packed separately, remove the shelf trays from their packing, peel off any
protective plastic coating and assemble them on the support members.
Continued on next page
Summary of Contents for IN-5C08-OF
