Part No. 26108 Rev. C December 2015
- 14 -
5000 Series Cabinets
Interior
HEATED CABINETS
-
CLEANING
Cabinet Well
To clean the hot cabinet well, first lift out the
deck trays and dividers and then sweep out or
vacuum loose debris. Finally, wipe out the well
with a damp cloth.
This cabinet is a dry well unit, so the well is not
waterproof. DO NOT pour water into the well as
it will leak out and damage insulation and
electrics.
Trays and
Shelves
Stainless steel trays, shelves, grills etc. should be cleaned with hot soapy water.
Do not use abrasive pads or cleaners (e.g. Scotchbrite pads or Jif), as these
may damage surfaces.
Warning:
Dishwasher detergents will damage any anodised aluminium parts.
Tilt Door Glass
Gently pull the top of the door forward, until it is
restrained in the open position.
The inside of the glass can now be carefully cleaned,
using a cloth and glass cleaner. Dry the glass off with
paper towels or a cloth.
DO NOT
use abrasive pads or cleaners, because they
will damage the surface of the glass.
End Glass
The insides of the end glass panels can normally be cleaned after the shelf
trays have been removed.
Only remove the shelf lights and brackets etc. when carrying out longer term
maintenance/cleaning.
