Part No.26113 Rev. G September 2018
- 12 -
Inline 3000 Square Series Cabinets
CLEANING
Cautions
HEATED CABINETS
-
CLEANING
Power
ALWAYS TURN THE POWER SUPPLY OFF BEFORE CLEANING.
Water
THIS UNIT IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY TO
CLEAN THE INTERIOR OR EXTERIOR OF THIS CABINET.
Exterior
HEATED CABINETS
-
CLEANING
Metal Surfaces
Stainless steel or aluminium surfaces should be cleaned with hot soapy water or
a good quality metal cleaning compound. DO NOT clean surfaces with abrasive
pads or cleaners, as paint, stainless steel and aluminium surfaces will be
damaged.
Glass
All glass should be cleaned using a good quality glass cleaner and a clean
cloth.
DO NOT
use abrasive pads or cleaners, because they will damage the surface
of the glass.
Sliding Doors
Sliding glass doors are located
by plastic guides at the top and
bottom.
The doors can be removed for
cleaning by sliding the door to a
central position, placing hands
either side of the door, lifting it
up and then swinging it out at
the bottom.
When replacing doors, make
sure that they are located in the
correct slots, top and bottom.
The left door should be in the inner slots, and the right door in the outer slots.
Sliding door tracks should be vacuumed out regularly to keep doors sliding
freely.
Continued on next page