IN-5H06/08/12-OF
- 9 -
© Future Products Group
Preparation
HEATED CABINETS
-
OPERATION
Shelf Location
and Ticketing
The shelf positions are fixed, because of the cables
required for heating and lighting.
The heat output of the radiant elements is factory set
for even temperature distribution with the shelves in
these positions.
The front and rear edges of the shelves are profiled
to carry ticketing/labels.
Power Supply
Ensure that power is connected to the cabinet.
Turn on the main power switch, as shown above.
Pre-heat the
Cabinet
Pre-heat the cabinet for 30 minutes, before loading with product.
Load Cabinet
Load cabinet with pre-heated product.
The cabinet is designed to maintain the temperature of pre-heated product. It is
not an oven, and consequently, if cold product is introduced, there could be a
considerable delay before the operating temperature is again reached.
Close all Doors
It is important to keep the rear doors closed. If doors are not fully closed, an
even temperature will not be maintained within the cabinet.
Summary of Contents for INLINE 5000C Series
Page 1: ...Heated Open front Cabinets Curved and Square Formats...
Page 28: ...Part No 27221 Rev G October 2019 28 5000 Series Open Front Cabinets IN 5H06 5H08 5H12 OF SQ...
Page 29: ...IN 5H06 08 12 OF 29 Future Products Group...
Page 30: ...Part No 27221 Rev G October 2019 30 5000 Series Open Front Cabinets...