manualshive.com logo in svg

FPV Model X-Racer X9, Installation Instructions Manual

The FPV Model X-Racer X9 is a high-performance racing drone that will take your flying experience to the next level. For detailed instructions on how to install and operate this drone, download the Installation Instructions Manual for free from 88.208.23.73:8080. Master your X9 with ease and precision.

Share
Download
background image

                                                                                                                                   

 

 

 

 

 

INSTALLATION INSTRUCTIONS

 

 

 

 

 

 

 

 

 

 

FPVMODEL LIMITED 

http://www.fpvmodel.com

 

 

Summary of Contents for X-Racer X9












Reviews:

No comments

Related manuals for X-Racer X9

A2Z Drone Delivery RDS1 User Manual preview
RDS1
Brand: A2Z Drone Delivery Pages: 40
A2Z Drone Delivery RDS2 User Manual preview
RDS2
Brand: A2Z Drone Delivery Pages: 44
Rayline R808 UFO Manual preview
R808 UFO
Brand: Rayline Pages: 16
Dedrone DroneTracker Event Kit 2.5 Installation Manual preview
DroneTracker Event Kit 2.5
Brand: Dedrone Pages: 25
REVELL Control FORMULA Q FPV User Manual preview
Control FORMULA Q FPV
Brand: REVELL Pages: 28
GearBest Z201YS Instruction preview
Z201YS
Brand: GearBest Pages: 10
Lumenier DLUX OSD User Manual preview
DLUX OSD
Brand: Lumenier Pages: 8
FETtec FC F7 Manual preview
FC F7
Brand: FETtec Pages: 22

Brands by name

Popular brands

Load more brands