Copyright © 2018 FPVMODEL LIMITED
1
Betaflight F7 Quick Setup Guide
Welcome to your new Betaflight F7 flight controller. This guide is intended to give you the basic
understanding of what your new flight controller can do, and more importantly, we’re going to show you
how to do it. Let’s start out with a general overview of your new Betaflight F7 flight controller:
By Philipp Seidel, Click to Enlarge
Specifications:
3s-6s battery input
STM32F7 processor
Built in Power Distribution Board
Dual Gyro Support onboard mpu6000 and soft mounted ICM20608 (32k support with ICM20608)
CLI for Gyro: set gyro_to_use = 0 (MPU6000), set gyro_to_use = 1 (ICM20608)
5v Regulator rating of 1.2 Amps
Board size is 36x36mm with 30.5x30.5 OC mounting
Current Sensor 145 Amps
16MB Flash Memory
Betaflight Target, BetaflightF7
4 uarts, no inverter requirement.
