Copyright © 2018 FPVMODEL LIMITED
2
Features:
Programmable LEDs, Flash Memory, individual pad for camera control, labeled Smart Audio/Tramp TX1 next
to VTx soldering pads. Labeled Smart Port TX2 pad next to Sbus/Ibus/DSM2 UART6 Tx, 5v and 3.3v pads
(user selection based on type of receiver used), four pads for ESC telemetry connected to RX1.(Each pad
placed near corners of the board)
Guide to Setup:
Your new Betaflight F7 flight controller comes with a wide array of connections and features that are user
selectable and easily configurable via Betaflight Configurator. Here are some of the common features for this
board.These features include but are not limited to: Smart Port Telemetry, Camera Control, Smart
Audio/Tramp Telemetry, ESC Telemetry, and SBus/other receiver setup, programmable LED, and buzzer. In
short, all of the features just mentioned can easily connect to your Betaflight F7 at the same time with a quick
and clear understanding of the pad placement and wiring setup. Given your own ability and understanding
of betaflight many more oprions are possible with this build.
TOP VIEW
To get started on the build process with your new Betaflight F7 please take a moment to familiarize yourself
with the wiring of the flight controller. Click on the picture above to direct yourself to an expandable view of
the flight controller.
