31
ENGLISH
5.2 CONTROL UNIT MENU
CONTROL
UNIT SETUP
CONTROL UNIT
USER CODE
CONTROL UNIT
LCD CONTRAST
USER CODE
YES
USER CODE
NO
Enter code
****
Re-enter code
****
Code disabiled
LCD CONTRAST
0
LCD CONTRAST
15
CONTROL UNIT
USB STORAGE
USB
STORAGE
LOAD
USB STORAGE
SAVE AS
Enter USB
YES=V / NO=X
Enter USB
YES=V / NO=X
LOAD
Press DOWN to
scroll down the
files
SAVE AS
Configuration1
SAVE AS
Saving OK
LOAD
Configuration1
CONTROL UNIT
SERIAL SPEED
SERIAL SPEED
115200 bps
SERIAL SPEED
9600 bps
9600 bps
19200 bps
38400 bps
57600 bps (default value)
115200 bps
CONTROL UNIT .
SOFTWARE
VERSION
SOFTWARE VERSION
version
CONTROL UNIT
DEFAULT RESET
Default Reset?
YES=V / NO=X
CONTROL UNIT
LANGUAGE
LANGUAGE
Italiano
LANGUAGE
English
Italiano
Francais
Espanol
Portuguese
Deutsch
English
To select
To select
To select
Setting the access
PIN (default 1234)
Setting the LCD
contrast.
Accepted values 0…
15
Load/Save
configuration from/to
USB
Setting the
serial port speed
Reading the installed
software version
Default Reset:
restore the unit to the
factory settings
Select language from the
programming menu
In the CONTROL UNIT menu, it is possible to change the menu language, set the PIN code, modify the LCD
contrast, save the headend configuration in a USB pen drive, load a configuration from a USB pen drive,
change the communication speed of the serial port (we recommend 57600 bps), check the software version
of the unit, and reset the unit to the default settings.
