12
English
4. In the address bar type in the IP address associated with the 3DGflex; the initial screen is displayed (fig. 1).
Type in the username and password to access the web interface home page.
DEFAULT:
USERNAME: admin
PASSWORD: 1234
6.2 HOME MENU
When the web interface is accessed, the configuration menu is displayed with the following Home Page (Fig 2):
In the 3DGFLEX home menu the general state of the CU is displayed.
Select the language for the web interface from among English, German, Italian and French.
The first module is the 3DG-CU control unit (refer to the CU manual for setting the CU parameters including
network parameters), and the other modules from position 1 to 6 may or may not be displayed. < >.
If the module is in this window, we can view its status.
To be precise, module 3DG-4ASI-4T gives:
The symbol √ if the enabled inputs include the signal and the receiver locks.
The symbol < > if at least one of the enabled inputs does not have a signal or the receiver does not lock.
The symbol < > is also shown If there is a bitrate overflow.
Each input (INPUT1, INPUT2 and USB) of the installed modules has a led indication showing the status:
• GREEN: the input is enabled and the receiver tuner is locked (USB: enabled and file read correctly).
• YELLOW: the input is enabled but the receiver is not locked (USB: file missing, not selected or incompatible).
• RED: the input is overloaded (remote power).
• GREY: the input is not enabled.
Fig 1
Fig 2
