19
English
By clicking on the “MUX Advanced Configuration” key the following window opens:
The window shown in figure 12 is used to configure:
• Time reference: to give a synchronisation time reference by selecting (INPUT 1, INPUT 2, ASI 1, ASI 2, USB).
(e.g. time, EPG. etc.).
• Enabled LCN: after flagging the checkbox the LCN can be enabled or deactivated and then order the
programs according to their assigned priority.
• Auto SID Remapping: if enabled, this innovative function allows automatically assigning a new progressive
SID to the programs, allowing changes to the output program list without having to tune the channels of
the TV.
• Auto program name: if enabled, this innovative function allows automatically assigning a new progressive
name to the programs, writing it in the spaces (base name), e.g. program 1, program 2, etc.
• Auto LCN: if enabled, this function allows setting up a base LCN number that is assigned to the first
program in the list, the following ones will then be set automatically in sequence from the base number.
• LCN country: select the country for setting the LCN.
Other advanced parameters can then be displayed for the signal, such as: Original Network ID, Network ID, and
Private Data Specifier Descriptor.
Other parameters however, like Transport Stream ID, Network Name, Cell ID can be set/changed by writing the
new name In the space.
NOTE: Click on “Apply” to save the changes.
Fig 11
