11
ENGLISH
3. PRODUCT INSTALLATION
1. Plug the power cord to the unit mains connector and to the mains socket.
2. Connect the AV input in the RCA connectors
3. Connect the coaxial cable of distribution to OUT connector
RF OUT
RF = 75
Ω
VIDEO GIALLO
AUDIO ROSSO
AUDIO BIANCO
Alla distribuzione TV
YELLOW
WHITE
RED
To TV distribution
Fig.1 standard connection
More schematics are available at the end of this instruction manual.
DEFAULT SETTINGS AND SOFTWARE RESET
Input
Audio
Sampling rate
48KHz
Gain
0dB
Type
Stereo
Video
Brightness
8
Saturation
8
Hue (NTSC)
0
Output
Country
UK
Channel
C21
Output Level
90dB
Aspect Ratio
Auto
COFDM parameters
Modul: 16QAM
FEC: 1/2
Guard Int. : 1/32
LCN
100
Service Name
EXTSRC
TS parameters for LCN
UK (see Tab.2)
To change type of modulation (COFDM/QAM)
Press and hold +, – and ENTER buttons for around 5sec until the display shows the message DVB-T and
DVB-C. The unit must be switched ON and in operating mode (not in programming: display OFF and TPE
disconnected). ATTENTION: If display shows BOOT, restart the product.
To restore default settings
Press and hold + and – buttons for around 5sec until the display shows the message REST (RESET). The
unit must be switched ON and in operating mode (not in programming: display OFF and TPE disconnected).
ATTENTION: this procedure does not change the modulation standard (COFDM o QAM)
