MODIFIERS & CONTROLLERS
Doc Q7.0
137
To Create a Modifier…
Select any controllable parameter (
) and press the
button to show the MODIFIER screen.
Select a
SOURCE
to assign to the current parameter or
choose NONE to remove an existing modifier.
The graph shows the relationship between the
control source (x-axis) and the sound parameter
(y-axis). The “dot” in the graph tracks the SOURCE as its value changes.
You may leave the MODIFIER screen to return to the parameter’s main menu at any time by pressing
or
Back in the EDIT menu, a modified
Knob
,
Slider,
or
Graph
parameter will be animated as the
source changes. Modified text parameters do not update in this fashion.
The text box above a knob shows the value that was set before the modifier was applied.
You must
STORE
the current preset to make the modifier setting permanent.
To Remove a Modifier…
To remove a modifier, just change its
SOURCE
parameter to NONE.
Modifier Example: Wahwah Control
Before we get into further detail about the other parameters on the MODIFIER screen, let’s look at the basic
Wahwah example from the introduction above. Z
Figure 7-3
Let’s assume that the controller called “EXT 1” has already been set up (in the CTRL page of the I/O menu) for MIDI
CC#
16 (its default setting), and that we have connected a MIDI foot controller with an expression pedal that is set
up to send this same message on the correct MIDI channel. (In fact, this is the default setting for the EXPRESSION
PEDAL 2 jack on the MFC-101).
