Doc Q7.0
197
Midi Implementation Chart
17.3
NOTE:
MFC-101 Presets and Instant Access Switches have the capability to send custom MIDI data, entered
freeform as hex code, which can be used for many applications not supported “natively” (ex: Note On/Off).
Function
Transmitted
Received
Remarks
Basic Channel
Default
Changed
1
1-16
1
1-16
Note Number
True Voice
X
X
Velocity
Note ON
Note OFF
X
X
X
X
After Touch
Keys
Channels
X
X
X
X
Pitch Bend
X
X
Control Change
X
O
CCs are GLOBALLY soft-assigned to functions via the I/O:CTRL menu.
These include INPUT volume, OUTPUT 1 and OUTPUT2 master volume,
Scene Select, Tap Tempo, Tuner Invoke, 12 “EXTERNAL” control nodes
(assignable as modifiers to one or more parameters on a per-preset
basis), all LOOPER functions, the BYPASS switch of every block instance
AMP1, AMP2, CAB1, CAB2, etc.), and the X/Y switches of the 20 block
types that support this function (AMP1, AMP2, etc.).
Program Change
True Number
Bank Select
O
O
O
O
Bank Select (CC#0) and Program Change messages may be used to recall
the presets of the Axe-Fx II. The unit also supports custom program
change mapping utilizing a FROM
TO table with 128 entries.
BANK select messages are persisted until a subsequent valid Bank Select
is received. An OFFSET may be applied using MIDI OC OFFSET on the
MIDI page of the I/O Menu.
Selecting a preset via the Axe-Fx II front panel will also transmit the
corresponding bank select and program change number messages.
System Exclusive
Fractal Audio
Real-Time
Non-Real-Time
O
O
X
O
X
X
The list of parameters that can be controlled/edited via SysEx is listed in
the Owner’s Manual under Factory Default Settings.
Real-time SysEx is used to transmit Tempo and Tuner.
System Common
Song Position
Song Select
Tune Request
X
X
X
X
X
X
System Real-Time
Clock
Commands
X
X
O
X
Axe-Fx II Global Tempo syncs automatically to MIDI Beat Clock.
Auxiliary Messages
Local ON/OFF
All Notes OFF
Active Sense
Reset
X
X
X
X
X
X
X
X
0 = YES, X=NO
