USER MANUAL
TVNext
TM
(NN01-054)
Last updated on June 2020
© 2020 FRACTUS ANTENNAS, S.L. -
5
3.
ELECTRICAL PERFORMANCE
3.1.
EVALUATION BOARD
The configuration
used in testing the TVNext
TM
antenna is displayed in Figure 1.
Measure mm
A
112
B
60
C
128
D
4.1
E
16
F
47.5
Tolerance
: ±0.2mm
D:
Distance between the TVNext
TM
chip antenna component
and the ground plane.
Material
: The evaluation board is built on
laminated substrate 1.0 mm thick (2 layers).
Clearance
Area:
16 mm x 60 mm (ExB)
Figure 1
–
EB_NN01-054. TVNext
TM
Evaluation Board.
3.2.
MATCHING NETWORK
The specs of a Fractus Antennas standard antenna are measured in their evaluation board,
which is an ideal case. In a real design, components nearby the antenna, LCD’s, batteries,
covers, connectors, etc. affect the antenna performance. This is the reason why it is highly
recommended placing pads compatible with 0402 and 0603 SMD components for a PI matching
network as close as possible to the antenna feeding point. Do it in the ground plane area, not in
the clearance area. This is a degree of freedom to tune the antenna once the design is finished
and considering all elements of the system (batteries, displays, covers, etc.).