• Continuous Drainage Under Good Condition
Continuous drainage hole
1 )Put in the PVC hose into the back of the closed hale, then connect the PVC hose
to the front.
1. Prepare PVC hose to drain out water
Back of the unit
For drainage
�'""�""
(The hose sold in market with inner dia. 13mm)
1
2. Take out the stopple of the drainage outlet .
3. Take out the soft cover, put it and tube stopple
,.,ro,.,�
into the bucket for storage.
t,•
Tube stopple
4. Connect the PVC hose with the drainage outlet.
o�;"·�'"'�
Drainage PVC hose
5.Place the bucket on its original location.
iill """'
""'m "� '""
the unit toward the direction
as the arrow points to
• t]-aucket
2)Put the water tank back, do according to the instructed way.
e
The Proper Way To Place The Water Drainage PVC Hose
When using continuous drainage, the PVC hose must be placed below the
drainage hole. Avoid uneven surfaces and do not "kink" the hose.
-3-
Av. del Libertador 2221 (1636) Olivos - Buenos Aires.
Líneas rotativas: (5411) 5353-0260
E-mail:
info@airqualitysrl.com.ar
Home Page: www.airqualitysrl.com.ar
