42
HALF-LOAD DETECTION SYSTEM
Your machine features a half-load detection system.
In case you put approximately half or less amount of laundries of maximum laundry capacity in your
machine, your machine will run so as to save washing time, water consumption and energy in some
programs. When the half-load function is active, the machine can complete the program you have set in a
shorter time.
SELECTING PROGRAMME
Select the convenient program for your laundries on the program table.
AUXILIARY FUNCTIONS
1.
Before starting the program, you can optionally select an auxiliary function.
2.
Press on the button of auxiliary function you would like to select.
3.
If auxiliary function symbol on electronic display flashes continuously, the auxiliary function you have
selected will be activated.
4.
If auxiliary function symbol on electronic display blinks, the auxiliary function you have selected will not
be activated.
REASON FOR NON-ACTIVATION:
1.
The auxiliary function you want to use in the washing program you have selected is not applicable.
2.
Your machine has passed over the stage, during which the auxiliary function you would like to select
would be implemented.
3.
It is not compatible with an auxiliary function you have selected previously.
1.
TEMPERATURE SELECTION
You can select the washing water temperature with the washing water temperature adjustment button.
Whenever you select a new program, the maximum washing water temperature is shown on the washing
water temperature display.
You can gradually decrease the washing water temperature between the maximum temperature and cold
washing (--) by pressing washing water temperature adjustment button. If you have missed the washing
water temperature you wanted, you can return to the intended temperature by continuously pressing the
washing water temperature adjustment button.
2.
SPIN SPEED SELECTION
You can set the spin revolution for your laundries via revolution speed setting button. When you select a
new program, the maximum spin revolution speed of the program you have selected will be viewed on the
display of revolution speed. You can gradually reduce the revolution speed between cancel spinning (--)
options through the maximum spin revolution of the program selected by pressing revolution speed setting
