44
6.
START/PAUSE BUTTON
By pressing on the Start/Pause button, you may start the program you have selected or suspend a
running program. If you switch your machine to the standby mode, the Start/Pause led on the
electronic display will blink.
7.
CHILD LOCK
The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot
be changed unintentionally.
To activate child lock, press and hold button 4 and 5 simultaneously for
at least 3 seconds. ‘’CL’’ will flash on the electronic display for 2 seconds when the child lock is
activated.
If any button is pressed or selected program is changed by the program dial while the child lock is
active, the “CL” symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a program is running, when the program dial is turned to the
CANCEL position and another program is selected the previously selected program continues from
where it was left.
To deactivate the child lock, press and hold button 2 and 3 simultaneously for at least 3 seconds until the
“CL” symbol on the electronic display disappears
.
CANCELLING PROGRAM
If you want to cancel any program running:
•
Switch the program
knob to “CANCEL” position.
•
Your machine will stop the washing operation and the program will be cancelled.
•
To get rid of the water accumulated in the machine switch the program knob to any program.
•
Your machine will perform the necessary discharge operation and cancel the program.
•
You can run your machine by selecting a new program.
FINISHING PROGRAMME
Your machine will stop by itself as soon as the program you have selected finishes:
The expression of “END” will flash on the electronic
display.