FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
23
OF 40
8.1.1.
Disassembling Clutch of Separator Roller
Demount the side plate
(A)
by removing
the screw
(1+2)
and the nut
(3)
Figure 25: Disassembling – Clutch Separator
Remove the clip
(1)
on the back side
Pay attention for the washer
(A)
Unscrew three screws
(2)
of the black
cover on the front side.
Take out the clutch unit
(3)
.
Pay attention for the washer
(B)
on the
inside of the clutch.
Note:
The clutch can’t get further
disassembled. It has to be replaced as
complete unit.
For assembly process the inverse way.
For details refer to the spare part
manual.
After each disassembly of the separator
roller the correct torque adjustment has
to be done. Therefore refer to chapter
9.1 Adjustment separator roller.
Figure 26: Disassembling – Clutch Separator
1
A
B
2
3
1
2
3
A
