FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
26
OF 40
8.5.
Exchange of the red intake rollers
There are two different types of intake
roller:
3x 249-xx-xxx
2x 249-xx-xxx (smaller in diameter)
Take off the clip on the backside
(1)
.
The axle will be moved in direction to
the front side without disassembling of
the tooth-belt and front wheel
(2)
.
Figure 33: Disassembling - Red Intake Rollers
For the removing of the intake rollers,
all clips in between of the rollers need
to be taken off, one after the other.
Also pay attention for the washers.
2pcs, only located left and right side of
the smaller roller
(X)
(249.xx.xxx)!
Figure 34: Disassembling - Red Intake Rollers
Note:
For the correct sequence of all washers
and clips by assembly, refer to the spare
parts catalogue.
For the assembling, make sure that the
intake rollers are mounted in the right
sense of orientation. They contain a
“one way bearing”.
For assembly process the inverse way of the
above disassembly description!
Figure 35: Disassembling - Red Intake Rollers
2x
2x
X
X
1
2
