FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
28
OF 40
Remove the light barrier
(1)
.
Disconnect the motor from the cable
board.
Mark the contact with a pen having the
correct polarity; helpful by later
assembling.
Unscrew three screws
(2)
and remove
the motor unit.
Figure 39: Disassembling - Motor Replacement
Move the slot disk (1) with a flat screw
driver off the motor axle.
Unscrew the screws
and remove the
motor.
For assembly process the inverse way of the
above disassembly description!
After assembling, the toothed belt has
to be adjusted. Please refer to chapter
6 “Adjustments”.
Figure 40: Disassembling - Motor Replacement
8.8.
Exchange of the motor for the stack rollers
Disassemble the back plate
(1)
Remove the light barrier
(2).
Disconnect the motor from the cable
board.
Mark the contact with a pen having the
correct polarity; helpful by later
assembling.
Unscrew both screws and remove the
motor
Figure 41: Disassembling - Motor Replacement
2
1
1
2
1
