FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
33
OF 40
9.3.
Assembling upper & lower mechanics
Make sure the washer and compression
springs have been put already onto the
rods.
Mount the upper mechanics
(1)
onto
the rods.
Move the upper mechanics in its low
position and lock it with the lever
(2)
.
Mount two clips
(3)
on the poles.
Connect cable no 18
(4)
. Guide the
cable correctly in its clip
(5).
Figure 54: Assembling - Upper & Lower Mechanics
Snap the Hall Effect Sensor into the
cover
(1).
Mount the cover
(1)
and fix it with
three screws
(2)
.
Mount the seal unit
Figure 55: Assembling – Upper & Lower Mechanics
Mount the top cover and fix it with the
corresponding four screws.
Note:
After finishing the assembly, it is
recommended to process some
function test. Therefore power up the
feeder with the Matrix F6/F8 and enter
into the service menu “Tests”
Perform feeder function tests.
Figure 56: Assembling - Top Cover
1
2
1
1
3
2
1
5
