FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
39
OF 40
11.
Maintenance Instruction
The following section provides general information for correct maintenance of the Feeder Matrix AF /AFS.
11.1.
General measures
Clean the outside of the Feeder with a soft cloth.
Do not use harsh chemical cleaners!
Clean the inside of the Feeder. Remove dust and possible paper particles.
Check sensors and remove paper dust if required.
Check the torque of the separation roller and belt tensions according to chapter 6.
Clean the sealer unit from paper residues and lime and replace the fissile wedge if required.
Replace worn out parts such as intake rollers, etc. if required.
11.2.
Cleaning of the Rubber Rollers
For the Feeder Matrix AF / AFS rubber rollers, use regular rubber roller cleaning agent as used for printer
and PC or other office machines.
Thinner and other unsuitable cleaning solvents may destroy the rubber rollers and plastic parts.
Thus the functionality of the Feeder Matrix AF / AFS is not longer guarantied.
Frama AG recommends the cleaning agent from TYP AG.
Rubber rollers special cleaner: 6-1508/W1/H/ soft
Web address:
www.typ-gummi-tgw.ch
11.3.
Lubrication chart
With the launch of Matrix R2, especially because of the higher performance of Matrix F82, Frama AG
decided to analyse the lubrication theme completely and define accordingly a lubrication instruction for
the after sales service. New, only two lubricants are applied for the entire Matrix Range:
Grease:
Fluorstatic 70+PTFE (new)
Oil:
Foodoil SH-15 (as before)
For correct lubrication of the Matrix Range refer to the manual “Lubrication Instruction”,
distributed with the technical circular T 3.5
